Welcome! 

Register :: Login
Classified Ads
 Back to Classified Ads | Woodworking Machinery > Band Saw
Restored 30" Tannewitz PH Band Saw - US $4,250.00 (Chatham, NJ)
Item Photos:
Click image to enlarge

Item Information:
Seller assumes all responsibility for this listing.
Ad Title: Restored 30" Tannewitz PH Band Saw
Item Class: Woodworking Machinery
Item Type: Band Saw
Size: 50" X 36" X 81"
Manufactured By: Tannewitz Works
Price: US $4,250.00
Seller Type: Private Seller
Seller Member ID: chathamworkshop
Item Location: Chatham, NJ
Ad Posting Date: 11/6/2019 1:17:44 PM
Ad Expiration Date: 12/6/2019 1:17:44 PM
Page Views: 426
Item Description:
Seller assumes all responsibility for this listing.

This Tannewitz PH 30” direct drive band saw has been restored. The saw runs quiet, free of vibration and will easily fit into a shop with an 8 foot ceiling.
During restoration, the saw was completely disassembled and all painted parts had the paint removed and then each was cleaned, primed and top coated. The main casting had auto body filler applied on the rough surfaces and sanded smooth. All fasteners were wire wheeled. The bearings were replaced with new ones for the upper wheel and the motor. The original upper blade guide was replaced with a Tannewitz guide with a new thrust bearing, and two new hardened steel jaws and two barely used carbide jaws. The lower Wright blade guide has a new thrust bearing and a new set of four hardened steel jaws. Upgraded electrics and wiring were added to the machine. New lining was put on the upper wheel brake shoes, and the lower wheel brake lining has minimal wear. The tires and tables are in good shape. The saw has a ½” 3 TPI blade and new throat plate.

The saw is lag screwed to the 4” X 4” shown in the pictures, and I can load it onto your trailer or designated carrier’s trailer.
Contact Bill, 973-975-8295, if you want to work out shipping arrangements with your carrier or if you want to see the machine run.

Band saw Specifics:

Motor 3 HP Howell, 860 RPM
Electrical Requirements 220/440 Volts 3 Phase, Amps 10/5
Weight: 1850 Lb.
Max Height 7’ 6”
Minimum Height 6’ 9”
Main Table 26” X 28”
Auxiliary Table 14” X 16”
Table Tilt 45 Deg Right,10 Deg L
Cutting Width 30”
Depth Under Guide 14”
Brakes: Upper and lower wheel foot operated brakes, 8” diameter drums
Serial Number 7657
Payment Details: 
Seller assumes all responsibility for this listing.
Payments Accepted:
Accept Type
Cash
X Personal Check
X Money Order / Cashier's Check
X Credit Card
PayPal
X Other (see comments)

Comments:

Shipping Details: 
Seller assumes all responsibility for this listing.
Shipping/Pickup Details:
Accept Type
Local Pickup
Will Ship (Seller Arranges)
X Will Ship (Buyer Arranges)

Approximate Dimensions and Weight:
Length = 50"
Width = 36"
Height = 6' 9"
Weight = 1850

Comments:
Contact Bill if you want to work out shipping arrangements with your carrier or if you want to see the machine run.
973-975-8295
Contact Seller
Contact Information:
Please provide your contact information below. All fields are required.
Your First Name:
Your Last Name:
Your Email:
Message to Seller:



Type the code above in the box below: