|
|
|
Seller assumes all responsibility for this listing.
Clausing Colchester 17" Gap Bed Lathe w/ Tracer Unit
Standard Specifications:
Swing over bed ways - 17"
Swing with gap bed removed - 22”
Swing over cross slide - 10-1/2"
Distance between centers - 80"
Spindle hole diameter - 3-1/8"
Spindle nose - D1-8 camlock
Spindle speeds - (16) 20 – 1600 RPM
Inch threading - (38) 2 to 72
Metric threading - (40) 0.4 to 14
DP threading - (27) 8 to 60
Mod threading - (18) 0.3 to 3.5
Inch feeds - (13) 0.002 to 0.032
Metric feeds -(13) 0.06 to 1.0
Leadscrew diameter - 1-1/2"
Leadscrew pitch - 4 TPI
Tailstock spindle travel - 5-1/2"
Tailstock spindle diameter - 3"
Tailstock spindle taper - No. 5 MT
Motor - 10 HP
Volts - 230
Phase - 3
Cycles - 60
Amps - 30
Approximate dimensions - 138" x 38" x 57" high
Approximate weight - 6,000 lbs.
Extras:
Clausing hydraulic tracer unit
3 and 4 jaw chucks (extra hard and soft jaws)
Several drive plates and assortment of drive “dogs”
Spindle dead center and Nihon-Seiken live center
(20) assorted insert holders - Turning, threading etc.
Cross-slide cut-off support and blade holder
Several boring bars
Several taper shank sleeves
Misc. wrenches
Approximate Dimensions and Weight:
Length = Approx 10'
Width = 31" w/o handles
Height = Approx 4'
Weight = 6000 lbs. |
|
|
|
Seller assumes all responsibility for this listing.
|
|
Seller assumes all responsibility for this listing.
|
|
|