|
Title: |
1895 Article-W. P. Davis, Key-Seater |
|
Source: |
Modern Mechanism 1895 pg 457 |
|
Insert Date: |
6/17/2011 8:33:55 PM |
|
The Davis Key-Seater and Slotting-Machine is shown in Fig. 2. The frame is made of one casting, together with the ways. In the machine shown in Fig. 2, the gears are l 5/8-in. face, and are all cut gears. The connection-rod is so arranged as to keep chips and dirt from falling into the crank-pin. The ways are bored out and the top of frame faced. The stud-pins to the clamp are provided with washers and so arranged that the clamp can be placed between them at any height required, and will not drop down. A simple arrangement is also furnished to give any desired draft to key-seat required, also any depth. This machine will cut ¼-in. to 1-in. key-seats. |
|
1895 W. P. Davis, Key-Seater
|
|