Photo Index - Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl. - 15-120 Ram Type

Machinery Photo Index

Manufactured/Badged by:
Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl.
Milwaukee, WI; Jackson, TN; Tupelo, MS

Machine Specifications
Machine Class:	Wood Working Machinery & Metal Working Machinery
Machine Type:	Drill, Radial
Machine Size:	32"
Submitted By:	CPeter James

Machine Specifications
Description/Model:	15-120 Ram Type
Date of Manufacturer:	1968
Serial Number:	1456588
Last Updated	1/21/2012 2:03:39 PM

Comments:

I am the third owner of this machine. It came from the lab in an electronics company and was purchased by one of the employees for use in a small machine shop he ran after he retired. When he finally closed that shop I picked it up to replace my 1947 Walker Turner radial drill. It was in pretty good condition and I left the original paint, just cleaned it up with Simple Green. I replaced the single phase motor with an ½ hp Walker Turner 3 phase and added a VFD. This is my favorite drill press and it gets a lot of use. This is one of the later models and has several updated features over the original Walker Turner models including a 6" spindle travel, quill wear adjustment, and increased column length for greater clearance over the table. The two tone grey paint scheme is original.

Photo 1:

Comments: Rockwell/Delta Radial Drill
Source: My Camera

Direct Link
IMG Code

Photo 2:

Comments: Drill Tilted
Source: My Camera

Direct Link
IMG Code

Photo 3:

Comments: Drill rotated
Source: My Camera

Direct Link
IMG Code

Photo 4:

Comments: VFD
Source: My Camera

Direct Link
IMG Code

Photo 5:

Comments: Speed and rotation Control
Source: My Camera

Direct Link
IMG Code

Photo 6:

Comments: Speed Chart
Source: My Camera

Direct Link
IMG Code