Photo Index - Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl. - Unisaw (Four Footed)

Machinery Photo Index

Manufactured/Badged by:
Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl.
Milwaukee, WI; Jackson, TN; Tupelo, MS

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Table Saw
Machine Size:	10"
Submitted By:	Neil Bellenger

Machine Specifications
Description/Model:	Unisaw (Four Footed)
Date of Manufacturer:	1939
Serial Number:	D-315 (View SN Registry Entry)
Last Updated	10/31/2020 11:02:42 AM

Comments:

This is a 1939 Delta four footed Unisaw. Located for me by a friend in 2012. The machine was covered by a layer of red paint and then a layer of thick green paint. No fence, miter gauge, or dust door were included. The top had considerable wear behind the blade and had a damaged edge. One extension wing had a damaged edge also. Between 2012 and 2014, the machine was disassembled, cleaned and repaired. The extra holes in the cabinet were welded closed. New arbor bearings were installed. The 1 horsepower, single phase, 115/230 volt motor was disassembled, cleaned and the bearings were replaced. One more FFU back from near death.

Photo 1:

Comments: Restoration mostly completed August 2014
Source: my camera

Direct Link
IMG Code

Photo 2:

Comments: Serial number
Source: my camera

Direct Link
IMG Code

Photo 3:

Comments: 1 hp, single phase, bullet motor
Source: my camera

Direct Link
IMG Code

Photo 4:

Comments:
Source:

Direct Link
IMG Code

Photo 5:

Comments: As found, 2012, top removed for transport.
Source: my camera

Direct Link
IMG Code

Photo 6:

Comments: As found, 2012
Source: my camera

Direct Link
IMG Code