Photo Index - Delta / Rockwell Mfg / Rockwell-Delta - #955 Double Duty Lathe

Machinery Photo Index

Manufactured/Badged by:
Delta / Rockwell Mfg / Rockwell-Delta
Milwaukee, WI; Jackson, TN; Tupelo, MS

True Manufacturer:
,

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Lathe, Wood
Machine Size:	9"
Submitted By:	Bill Jones

Machine Specifications
Description/Model:	#955 Double Duty Lathe
Date of Manufacturer:	Pre 1940
Serial Number:
Last Updated	3/11/2005 11:38:25 AM

Comments:

Lathe was purchased for my father prior to 1940. I am unsure, but it does seem to be a "pre-Rockwell" lathe, and as the label describes, was manufactured by the Delta Specialties co, rather than Delta Manufacturing. There is no model number on the machine, but a label with the name Double Duty Lathe is found on the base of the lathe. The 1940 Delta Manufacturing Co catalog that my father saved shows this exact lathe as being a model 955, and the picture in the catalog matches the lathe exactly, except that the lathe pictured has "Nine-inch Lathe" written on the bed. Mine does not. I suspect that this was manufactured prior to it being listed as a Delta Manufacturing lathe, ie perhaps early 30s?
Unlike other Delta lathes, this lathe does NOT have a screw spindle, but instead has 1/2" diameter round shaft with a flat, where the #138 spur or #143 face plate or the #120 chuck can attach.

Photo 1:

Comments: Full view of #955 Double Duty lathe
Source: My camera

Direct Link
IMG Code

Photo 2:

Comments: View showing label (before I cleaned shop)
Source: My Camera.

Direct Link
IMG Code